SUPPORT - MANUALS & DOWNLOADS
Control Strips

PI-64 Control Strip

Note: Today we recommend using CC-84 instead of PI-64.

 

Click here to visit CC-84 Control strip page. 

 

ChromaChecker™ Print Inspector PI-64 Control Strip

Multipurpose control strip for overall system analysis,  simple G7® and TVI calibration (3 steps).
Consists of 64 patches. First patch wider for easier scanning start (X-Rite eXact Scan). 


Single line –  eXact / Alwan Print Verifier

patch width = 4 mm, patch height = 10 mm /  total size: 300 x 10 mm
patch width = 5 mm, patch height = 10 mm  /  total size: 370 x 10 mm 
patch width = 5,6 mm, patch height = 10 mm  /  total size: 420 x 10 mm

if necessary, height can be reduced as necessary (larger height makes for easier scanning by an operator) 
   
download files for eXact   


Dual line – X-Rite i1 Pro1 / 2, eXact  / Alwan Print Verifier,  i1Profiler


patch width = 7.5 mm, patch height = 10 mm /  total size: 326 x 20 mm (i1Pro, eXact)
patch width = 7.5 mm, patch height = 8 mm /  total size: 286 x 16 mm (eXact)

 
Download files for ChromaChecker_PI64_2R-V1